Model: | CJB-100-8AD |
Operating Voltage: | DC12V/DC24V |
Distrotion: | 10A |
Working temperature: | -40℃~+65℃ |
Speaker impedance: | 8Ω |
Emergency Portable Lound Siren Alarm With Megaphone
Model: CJB-Y-8AD
Voltage: DC12V/24V
Tone: Custom
PRODUCT DETAILS
The CJB-Y-8AD lound siren alarm series has a shout function. This series of products is more suitable for emergency vehicles going out to perform official duties. It can directly shout to the vehicle driving in front, and can effectively output the maximum volume.
The difference between its operation mode and the lound siren alarm with handle is that it cannot be operated directly through the hand controller. Need to operate directly on the panel. In addition, the operation of this alarm on the panel is mainly adjusted by the rotation of the button to change the Tone of siren. On the left side of the rotation button, you will see two red buttons, these two buttons mainly control the flashing of the light and rotation.
The most important point is the way the alarm siren of installation. This is a portable lound siren alarm. And does not necessarily need to installation directly in the cab of the car. It can be directly carried by the handle above the alarm, or hung at any position in the cab, and fixed. Moreover, the range of vehicles used is wider, and it can also be used on police motorcycles in time.
In addition, the handle of the control box also can disassemble. Then to fix. This way can help more people to use it about this design.
This alarm has a variety of wattages to choose from, such as 80w, 100w, and 150w. Therefore, a variety of speakers are also available for selection. There are also single-handle and double-handle options. The double-handle is more suitable for ambulances to facilitate communication between front and rear compartments.
ONE SET! ONLY ONE SET!