| Model No: | TBD-50L12A-48 |
| Output Power: | 55W |
| Working Voltage: | DC12V/24V |
| Light Source: | LED |
| Lens Color: | Red/Blue/Amber/Transparent |
| Light Frequency: | 30 – 150 n/min |
| Light Intensity: | >=1200 |
| Materials: | PC Lens & Aluminum Base |
| Dimensions (L*W*H): | 1180mm*290mm*127mm |
| Carton Size: | 1250mm*360mm*220mm. 1 set/carton |
| Gross Weight: | 18 KG |
ultra thin flashing light bar (TBD-50L12A-48) has many parts, such as LED lamp unit, control module, middle tube, lampshade, chassis, light controller, tripod, hook, label, wiring harness, fasteners, etc. The outer cover is made of German imported pc material Injection molding. The surface is add to UV coating proces to ensure the bright colors of the warning lights and will not fade due to long-term ultraviolet radiation.
Luminous standards meet international standards.
The rated voltage of the lightbar is DC12V, DC24V
The colors are red, blue, yellow, green, transparent. (The voltage of some light is 12-24V universal)
can customization according to customer needs, this module is mainly to control the flashing mode of the light and the synchronization of the light combination.
The light cover is made of UV PC material, which is resistant to ultraviolet radiation. Our light covers are all self-developed molds. There is a special injection molding workshop. We have 6 injection molding machines to ensure our production needs. When the length of the light cover changes, the lamp shades on both sides are fixed, but independent extension shades can add to increase the length of the lamp body and make it coincide with the bottom profile.
According to the length of the lightbar and the total number of corresponding light units to determine its power, the basic power will be between 30-150w.
The aluminum profile of the chassis is calculated based on the length of the light bars, and then laser cutting. We have a laser cutting machine, which can ensure the accuracy of the chassis size.
We have a laser marking machine, which can laser print LOGO on the lamp body. The LOGO can provide according to the needs of customers, and is not limited by the minimum order requirement of traditional labels.
There are two types of light control, one is an independent light controller, and the other is to cooperate with the alarm. The control handle on the siren can directly control the functions of the full size light bars.
Tripod is mainly the main shaft of light bar body and car installation. It must be equipped with a hook to fix it on the roof of the car.
Retractor: We have more than 10 types of retraction hooks, which can match according to different vehicles and models, mainly fixed by screws. At present, the following types are commonly used in the market: five-hole retractor, extended non-sink retractor and daily pickup. The five-hole retractor and the extended non-sink retractor are more versatile and can meet the different requirements, scenarios and different vehicles. The daily pica hook can select and custom according to the size and particularity of the model.
Our police light bar are mainly install on the roof of emergency vehicles. At the same time, they can also equip with electronic alarms siren as needed. Therefore, it is an ideal equipment for public security, military police, medical rescue, engineering rescue, fire fighting, bank escort and other special vehicles for emergency tasks and on-site command. Because of the different use occasions, the light bars also have different colors, and their flashing methods are also diverse, such as from left to right, from right to left, from both ends to the middle.
The light bars can divide into three types: full-size light bars, mini light bars and ultra-thin light bars.
With the development of society, the light source type of the lights bars is also mainly LED lights. Take the 8000 series lights bars as an example, in addition to the main light source of LED, it can also be equipped with flashing lights, spot lights.
Firstly,Brand awareness as the top leader in warning light industry.furthermore, we provide service term in Technology and research 24 hours. and complete production line in time.
We can provide OEM support for customers.
Firstly designing product,mold opening and produce molds, making samples after opening molds, also product program design, appearance design, accessories customization and Laser cutting.
Yes. Located as factory for 35 years. And we complete all product design, development and mold independently. Also we have a complete set of production line.
Firstly We accept bank T/T payment term,
Then For the first cooperation, generally deal with 100% prepaid TT.
Also TT 50% as a deposit for the next order after the first cooperation, and balance will be paid before shipment.
Meanwhile,The L/C payment term can be negotiated
Samples usually take 3-7 working days.
Wenzhou, 480 km from Shanghai. 300 km from Ningbo.
Shanghai and Ningbo port.
Firstly warranty period is one year.In addition, three years, five years optional with different products and prices, so that different warranty period.
