TBD-43 signal light manual
TBD-43 signal light manual
The TBD-43 signal light manual consists of four main parts, the cover, the base, the light source, the harness, and some small lamps with stainless steel shield on the outside to prevent scratching on the surface of the cover.Small lights can be mounted on or around the top of an emergency vehicle. Of course, some small lights are mounted and inside the vehicle to warn people inside the vehicle. Small lights of different shapes and shapes can be mounted in different locations.Small lights can be installed in different emergency vehicles, such as ambulances, police cars, fire fighting, or municipal works, airports, high-speed patrol vehicles are installable small lights.Therefore, small lights will have different colors and flashing modes, but small lights can be customized to suit your needs.In addition to the small lights installed in emergency vehicles, we can also provide small lights installed on police motorcycles.
Summary of the TBD-43 signal light manual
TBD-43 signal light is a new product developed by our company. The product consists of four parts: cover, condenser, base and light source.The outer cover is made of PC material with good light transmission; it has the characteristics of high strength and long service life; the light source is led and the luminous intensity conforms to the GB13954-2009 standard, easy to install and use. The light integrates warning and lighting into one,It is an ideal equipment for warning of special vehicles such as modern “public security police”, “engineering rescue” and so on.
Technical parameter of
Voltage | DC12V~C24V | Installation | Screw | |
Power | 《25W | Weight | 0.67Kg | |
light source | LED | Size | 266mm×121mm×36mm | |
Intensity of illumination | ≥2nd level(GB13954-2009) | Color | Red,Amber,Blue, Transparence | |
Ambient Temperature | -40℃~75℃ | Working Mode | Illumination,flashing (External controller) |
Outline, wiring diagram
Installation, operation
Put the signal light in the proper position of the vehicle and fasten it with screws.Connect the circuit as shown in figure (2).After checking the wiring, turn on the light control switch.The signal light works, otherwise the light goes out.
matters needing attention
Working voltage and cover color can be customized according to customer’s requirements.
Packing list(TBD-43 signal light manual)
TBD-43 signal light | 1PC | Certificate | 1COPY | |
Controller (packaged separately) | 1PC | 304 pan head tapping screw ST4×16-c-h (optional according to the order) | 2PC | |
Manual | 1COPY | 304 stainless steel flat washerφ4 | 2PC | |
Silicone ring | 2PC |